Post Ad in Stationery
Filter: Offer | Need | All

MS Polymer Sealant For Refrigerator Truck -CNY 10

Publish Date: 30-11-2016 11:41:15 | Contact name: Qin Gao | Location: CHINA | Place: No.1129,Denghui Road,Minhang District,Shanghai,China | 1 times displayed |



If you are planning to wholesale best cheap and high quality ms polymer sealant for refrigerator truck China, or hot sale ms polymer sealant for refrigerator truck in China from professional ms polymer sealant for refrigerator truck manufacturers and suppliers and factory, please feel free to contact SEPNA, and welcome to check products price with us.MS1353 is a one component multi-purpose and anti-sagging elastic sealant; it can react with moisture in the air and then it is cured, to form a permanent elastomer.◆Detailed Product DescriptionProduct descriptionPUNADE MS series is a silane-modified polyurethane sealant, with the advantages of polyurethane and silicone sealants.MS1353 is manufactured in strict accordance with ISO9001/14001 Quality Assurance System and related protection provisions.Features1.Low VOC, silicone, plasticizer migration, or bubbles curing, with very little odor.2.Wide range of flexible bonding and durability, primer bonding-free.3.It can be painted, polished, and bonded and repaired in a repeated manner, but necessary surface requirements are not changed when substrates are re-bonded.4.UV resistant, anti-aging and weathering resistance, flooding resistant and mould resistant.5.Resistant to fresh water, sea water and usually water-based cleaning agents, and has a strong bearing capacity to fuel, mineral oil, vegetable oil and animal fat and crude oil,6.Intolerant to concentrated organic or inorganic acid/base solution or solvent. For specific requirements,we will provide relevant products and advice.7.Dealcoholized curing, no corrosion to substrates, and substrates not polluted, in line with the standard for stone stain resistance.Usage1.Specially used for marine wood floor filling and bonding2.Good adhesion to many substrates, include wood, various metal and surface treatment (painting or plating), glass, concrete products, mortar, ceramic materials and plastics and rubber and so on.3.Suitable for industrial bonding and fixing (such as the installation of automobile windshield, and the manufacturing of means of transportation and lift cabinets),4.Flexible seal bonding and fixing required for medium strength and high modulus.5.Compatibility test should be done on the actual substrates and in the environment in advance.◆Date TableChemical baseOne-component modified polyurethaneColorWhite, gray, black and beigeCuring mechanismMoisture-curingDensityAbout 1.4kg/LExtrusion rateAbout 600g/minAnti-saggingMild liquidityConstruction temperature5-35℃Surface curing time60mins(dependent on state of the environment)Curing rate3-5days about 13mm(dependent on state of the environment)Shrinkage rateAbout 2%Shore A hardnessAbout 50Glass transition temperature-60℃Tensile strength> 2.0Mpa.Elongation at break> 550%Tear strengthAbout 14N/mmInterface displacement capacity25% (The joint displacement 100%)(ISO11600 and JC485 standard classification)elasticity modulusHM (high modulus)(ISO11600 and JC485 standard classification)Recommended SubstrateF+G (cement and glass)(ISO11600 standard classification)Recommended SubstrateM+C+G+Q (metal, cement, glass and others)(ISO11600 standard classification)Artificial Ultraviolet (uv) LightNo crack, pulverization, and discoloration on the(300W,10000hr)surfaceOperating temperatureLong-term -40℃ --+90℃10 hours 120℃1 hours 145℃Shelf life (sealed storage at below 25℃ )12 monthsNotice:The product has passed below test standardsISO11600-2002Construction structure&—Joint products—Classification and requirement of sealants25HM F+GJC485-92Elasticity construction sealants for window   MS-1-MCGQ-A-KJC/T881-2001Construction sealant for concrete joint  I-N-25HMJC/T883-2001Construction sealant for stone   I-MS-25HMJC/T884-2001Construction sealant for color coated steelI-MS-25HMJC/T885-2001Construction sealant for mould proofingMS-20HM-0◆Operation1) Surface treatmentBonding surfaces should be clean, dry, without grease, oil and dust; for the surfaces difficult for bonding (such as PP/PE material) the bonding effect can be increased by applying primer. For details call us.2) Construction---Rigid packaging: cut the tube mouth.---Flexible packaging: put glue into the glue gun and cut the closed mouth.---In accordance with the designed adhesive strip cutting nozzle, the glue gun for manual hard tube, pneumatic piston glue gun or rubber pump equipment must be used in order to achieve satisfactory sealing effect.---If PUNADE MS1353 will touch with polyurethane bonding glue or paint, we must wait until polyurethane is fully cured before PUNADE MS1353 can be used for jointing or bonding.3) Trimming and finishingTrimming and finishing must be conducted before drying the surface, and prior applicability/compatibility test on the finishing agents or lubricants must be done.4) Cleaning---The PUNADE MS1353 uncured can be removed from tools or equipment, with the use of a suitable solvent or PUNADE Cleaning Paste---Once cured it can only be removed by mechanical method--- Immediately cleaned with industrial hand cleaner and water if stick to skin---The redundant sealant not used up can be sealed and saved, and the cured part on its surface can be removed before next use. Applicability test is needed.5) Surface painting (when necessary)---PUNADE MS1353 can be available for painting before and after drying the surface.--- A compatibility test should be done before painting.---The thickness and hardness of the paint layer may weaken the elasticity of glue, and it is possible for the paint to be cracking.◆Package and StoragePackageHard tube: 300ml; Hose: 600ML;  Keg: 23L;   Barrel: 195L.Storage and transportShelf life (sealed storage at below 25℃): 12 months.◆Safety Operation MaterialMSDS isn't included here. Please read TDS, MSDS and label carefully before operation. You can get MSDS from SEPNA or other distributors, or mail to service center sepna@sepna.cc, or call +86-400-882-1323.◆Product WarrantyAll product properties and application details based on information believe to be reliable and accurate. But you still need to test its property and safety before application. The advices we supply don't apply in any circumstances. SEPNA don't make assurance of any other applications outside the specification until SEPNA supply a special written guarantee. SEPNA is only responsible to replace or refund if this product is defective within the warranty period stated above. SEPNA makes it clear that will not be liable of any accidents.

Share  
    | Report bad use or Spam

Contact Qin Gao: MS Polymer Sealant For Refrigerator Truck

Phone: 15216655520

*

*

*



Send me an email with links to manage my Ad

Related Ads

Aluminum Die Casting LED Lamp Cover offer Stationery

Aluminum Die Casting LED Lamp Cover

Stationery - - CNY 10

Product Description Product nameAluminum Die Casting LED Lamp CoverProcess MethodDie castingMaterial:Aluminum AlloyFinishPaintingColorWhiteDimensionD200 x 18mmShapeRoundCavity1ApplicationLED LightCust...

Powder Coating Finished Camera Ring Parts offer Stationery

Powder Coating Finished Camera Ring Parts

Stationery - - CNY 10

Product Description Product namePowder Coating Finished Camera Ring PartsProcess MethodDie castingMaterial:Aluminum Alloy A380FinishPowder CoatedColorCool GreyDimensionD160x 15mmShapeRoundCavity1Produ...

Aluminum Die Casting Electric Motor Cover offer Stationery

Aluminum Die Casting Electric Motor Cover

Stationery - - CNY 10

Product Description Product nameAluminum Die Casting Electric Motor CoverProcess MethodDie castingMaterial:Aluminum Alloy A380FinishPaintedColorSilver PaintDimensionD180 x 35mmShapeRoundCavity2Product...

Aluminum Die Casting Other Auto Motor Parts offer Stationery

Aluminum Die Casting Other Auto Motor Parts

Stationery - - CNY 10

Product Description Product nameAluminum Die Casting Other Auto Motor PartsProcess MethodDie castingMaterial:Aluminum Alloy A413FinishPaintedColorSilverDimension320 x 80x 55mmShapeIrregularCavity1Prod...

Aluminum Alloy Die Casting Motor Gear Parts offer Stationery

Aluminum Alloy Die Casting Motor Gear Parts

Stationery - - CNY 10

Product Description Product nameAluminum Alloy Die Casting Motor Gear PartsProcess MethodDie castingMaterial:Aluminum Alloy A380FinishPaintedColorSilverDimension180 x 120x 52mmShapeIrregularCavity1Pro...

Die Casting Motor Engine Cases offer Stationery

Die Casting Motor Engine Cases

Stationery - - CNY 10

Product Description Product nameDie Casting Motor Engine CasesProcess MethodDie castingMaterial:Aluminum Alloy ADC12FinishPaintedColorSilverDimension380 x 280x 220mmShapeIrregularCavity1Production Pro...

High Precision Die Casting Radiator For Bus Or Truck offer Stationery

High Precision Die Casting Radiator For Bus Or Truck

Stationery - - CNY 10

Product Description Product nameHigh Precision Die Casting Radiator For Bus or TruckProcess MethodDie castingMaterial:Aluminum Alloy A413FinishSand Blast & alodine & EMIColorSilverDimension280x280x23m...

Die Casting Furniture Chair Leg Support Part offer Stationery

Die Casting Furniture Chair Leg Support Part

Stationery - - CNY 10

Product Description Product nameDie Casting Furniture Chair Leg Support PartProcess MethodDie castingMaterial:Aluminum Alloy A380FinishLacqueringColorGreyDimension580x100x75mmShapeIrregularCavity1Prod...

OEM Precision Zinc Die Casting Door Handle offer Stationery

OEM Precision Zinc Die Casting Door Handle

Stationery - - CNY 10

Product Description Product nameOEM Precision Zinc die casting door handleProcess MethodDie castingMaterial:Zinc Alloy 3#FinishPearl Chrome PlatedColorSilverDimension180x48x25mmShapeIrregularCavity2Pr...

Aluminum Enclosure Box For Electronics offer Stationery

Aluminum Enclosure Box For Electronics

Stationery - - CNY 10

Product Description Product nameAluminum Enclosure Box For ElectronicsProcess MethodStampingMaterial:AluminumFinishAnodizeColorNaturalDimension250x220x120mmShapeOblongProduction ProcessStamping, debur...