Post Ad in Stationery
Filter: Offer | Need | All

Low Modulus Construction Sealant -CNY 10

Publish Date: 30-11-2016 11:43:46 | Contact name: Qin Gao | Location: CHINA | Place: No.1129,Denghui Road,Minhang District,Shanghai,China | 2 times displayed |




If you are planning to wholesale best cheap and high quality low modulus construction sealant China, or hot sale low modulus construction sealant in China from professional settlement joint of construction adhesive, contrect wall stone construction adhesive, waterproof joints sealing polyurethane sealant manufacturers and suppliers and factory, please feel free to contact SEPNA, and welcome to check products price with us.


Single component polyurethane construction sealant PU821


◆Detailed Product Description


PU821 is one component polyurethane construction sealant of low modulus


Features


1.Low modulus and high elasticity, good sealing and water-proof property


2.One component, convenient to construct, nonpoisonous and tasteless after curing, green and environmental


3.Bonding well with many substrates, no corrosion and pollution to substrate 


4.Good compatibility between new and used adhesive, convenient to repair


5.Excellent aging, water and oil resistance, moldiness 


Usage


1.Sealing of expansion and settlement joint of construction


2.Sealing of upstream face crack of drainage pipeline


3.Sealing of through holes on wall and at floor concrete


4.Sealing of joints of prefab, side fascia, stone and color steel plate


◆Data Table






Model Number




PU 821






Main Raw Material




Polyurethane






Color




Black/White/Gray






Hardness




30±5 Shore A






Density




1.35±0.05Gr/cc






Sagging




≤1mm






Volatile content




≤4%






Extrudability




≥80ml/min






Touch dry time




≤180Min






Elastic recovery




≥80%






Pollution properties




Non






Elongation at break




≥600%






Application temperature




5~35℃






Note:


①All data above ware tested under standardized condition.


②All data listed in the chart were for rhe generalized item in the series; please refer to the related datasheet for special items.


③Storage condition has a direct impact to the products’ shelf life, Please refer to the instruction for special items’ storing.


◆Operation


Clean before operation


Clean and dry all surfaces by removing foreign matter and contaminants such as oil dust, grease, frost, water, dirt, old sealants and any protective coating. Dust and loose particles should be  cleaned.


Direction of operation


Tool:Manual or pneumatic plunger caulking gun


For cartridge


1.Cut nozzle to give the required angle and bead size


2.Pierce the membrane at the top of the cartridge and screw on the nozzle


3.Place the cartridge in an applicator gun and squeeze the trigger with equal strength


For sausage


1.Clip the end of the sausage and place in barrel gun


2.Screw end cap and nozzle on to barrel gun


3.Using the trigger extrude the sealant with equal strength


Attention of operation


Wear suitable protective clothing, gloves and eye/face Protection. After contact with skin, wash immediately with plenty of water and soap. In case of accident or if you feel unwell, seek medical advice immediately


◆Package and Storage


Package                                                    Storage


310ml cartridge, 20pcs/carton                   Keep in cool and ventilative place


400ml/600ml sausage, 20pcs/carton        Temperature≤25℃, humidity≤50%RH


Color: Black /White/Gray                           Shelf life: 9 months


◆Safety Operation Material


MSDS isn't included here. Please read TDS, MSDS and label carefully before operation.You can get MSDS from SEPNA or other distributors, or mail to service center sepna@sepna.cc, or call +86-400-882-1323.


◆Product Warranty


All product properties and application details based on information believe to be reliable and accurate. But you still need to test its property and safety before application. The advices we supply don't apply in any circumstances. SEPNA don't make assurance of any other applications outside the specification until SEPNA supply a special written guarantee. SEPNA is only responsible to replace or refund if this product is defective within the warranty period stated above. SEPNA makes it clear that will not be liable of any accidents.








Share  
    | Report bad use or Spam

Contact Qin Gao: Low Modulus Construction Sealant

Phone: 15216655520

*

*

*



Send me an email with links to manage my Ad

Related Ads

Aluminum Die Casting LED Lamp Cover offer Stationery

Aluminum Die Casting LED Lamp Cover

Stationery - - CNY 10

Product Description Product nameAluminum Die Casting LED Lamp CoverProcess MethodDie castingMaterial:Aluminum AlloyFinishPaintingColorWhiteDimensionD200 x 18mmShapeRoundCavity1ApplicationLED LightCust...

Powder Coating Finished Camera Ring Parts offer Stationery

Powder Coating Finished Camera Ring Parts

Stationery - - CNY 10

Product Description Product namePowder Coating Finished Camera Ring PartsProcess MethodDie castingMaterial:Aluminum Alloy A380FinishPowder CoatedColorCool GreyDimensionD160x 15mmShapeRoundCavity1Produ...

Aluminum Die Casting Electric Motor Cover offer Stationery

Aluminum Die Casting Electric Motor Cover

Stationery - - CNY 10

Product Description Product nameAluminum Die Casting Electric Motor CoverProcess MethodDie castingMaterial:Aluminum Alloy A380FinishPaintedColorSilver PaintDimensionD180 x 35mmShapeRoundCavity2Product...

Aluminum Die Casting Other Auto Motor Parts offer Stationery

Aluminum Die Casting Other Auto Motor Parts

Stationery - - CNY 10

Product Description Product nameAluminum Die Casting Other Auto Motor PartsProcess MethodDie castingMaterial:Aluminum Alloy A413FinishPaintedColorSilverDimension320 x 80x 55mmShapeIrregularCavity1Prod...

Aluminum Alloy Die Casting Motor Gear Parts offer Stationery

Aluminum Alloy Die Casting Motor Gear Parts

Stationery - - CNY 10

Product Description Product nameAluminum Alloy Die Casting Motor Gear PartsProcess MethodDie castingMaterial:Aluminum Alloy A380FinishPaintedColorSilverDimension180 x 120x 52mmShapeIrregularCavity1Pro...

Die Casting Motor Engine Cases offer Stationery

Die Casting Motor Engine Cases

Stationery - - CNY 10

Product Description Product nameDie Casting Motor Engine CasesProcess MethodDie castingMaterial:Aluminum Alloy ADC12FinishPaintedColorSilverDimension380 x 280x 220mmShapeIrregularCavity1Production Pro...

High Precision Die Casting Radiator For Bus Or Truck offer Stationery

High Precision Die Casting Radiator For Bus Or Truck

Stationery - - CNY 10

Product Description Product nameHigh Precision Die Casting Radiator For Bus or TruckProcess MethodDie castingMaterial:Aluminum Alloy A413FinishSand Blast & alodine & EMIColorSilverDimension280x280x23m...

Die Casting Furniture Chair Leg Support Part offer Stationery

Die Casting Furniture Chair Leg Support Part

Stationery - - CNY 10

Product Description Product nameDie Casting Furniture Chair Leg Support PartProcess MethodDie castingMaterial:Aluminum Alloy A380FinishLacqueringColorGreyDimension580x100x75mmShapeIrregularCavity1Prod...

OEM Precision Zinc Die Casting Door Handle offer Stationery

OEM Precision Zinc Die Casting Door Handle

Stationery - - CNY 10

Product Description Product nameOEM Precision Zinc die casting door handleProcess MethodDie castingMaterial:Zinc Alloy 3#FinishPearl Chrome PlatedColorSilverDimension180x48x25mmShapeIrregularCavity2Pr...

Aluminum Enclosure Box For Electronics offer Stationery

Aluminum Enclosure Box For Electronics

Stationery - - CNY 10

Product Description Product nameAluminum Enclosure Box For ElectronicsProcess MethodStampingMaterial:AluminumFinishAnodizeColorNaturalDimension250x220x120mmShapeOblongProduction ProcessStamping, debur...